Single phase voltage stabilizer – Cabinet type – 70v-275v

Product Introduction

Single phase voltage stabilizer – Cabinet type – 70v-275v is one of our many products, there are many products under Cabinet type – 70v-275v series, not only single phase, but also three phase, no matter which one you need, You can refer to our product page, or contact us directly, through the contact information at the bottom of the page, or the chat tool in the lower right corner of the page, you can contact us.

Product parameters

Requirments / Model		500VA	1000VA	1500VA	2000VA	3000VA	5000VA	8000VA	10000VA	12000VA
Input	Phase	Single phase
	Voltage	70V-275V
	Frequency	50/6OHz
	Adjusting time	<0.5s(when input voltage has a change of 10%)
Output	Voltage	220V士10%AC
	Frequency	50/60Hz
	Loading power factor	0.8
Environmental	Operating temperature	-5~+40℃
	Storage temperature	-10~+50℃
	Humidity	20% to 90%
Protection	Over Volt.	YES
	Overheating	YES
	Over load	YES
	Short Circuit	YES
	Low voltage	YES
	Delay	YES
Packaging	Net Wt.(KG)	2.05	3.95	4.59	5.35	8.81	11.67	15.64	17.3	19.35
	PCS PER CTN	4				1
	Gross Wt.(KG)	9.51	17.8	20.36	23.4	9.8	12.98	17.03	18.69	20.74
	Product size(mm)	217109145	240139183			342220244		390220244
	Package size(mm)	495270190	710330230			415270300		460270300

Voltage Regulator Selection Guide

How much voltage stabilizer should a house have? UKEO single phase voltage stabilizer

If your family needs to buy a voltage stabilizer, it is generally determined according to the situation of your family, for example, the location distribution of electrical appliances that need to use stable voltage, their total power, and so on. To know the moment when some appliances start, the power is very high, the following table lists some of them for reference:

Common electrical power

household appliances	rated power	Instant start power
Wall-mounted air conditioner 1.5P	1125W	1125W*3=3375W
Vertical air conditioner 3P	2250W	2250W*3=6750W
water pump	2000W	2000W*3=6000W
refrigerator	450W	450W*3=1350W
induction cooker	2000W	2000W
water heater	1800W	1800W
computer	300W	300W
TV set	200W	200w
electric light	50W	50W

Form Description

You can refer to the table above to choose a suitable voltage stabilizer according to your household electrical appliances. When choosing, you should also calculate the required power according to the type of electrical appliances. Buy single phase voltage stabilizer in bulk and choose UKEO.

How to choose?

Pure resistive load

1. For pure resistive loads such as incandescent lamps, resistance wires, electric furnaces and other equipment, the power of the voltage stabilizer should be 1.5 to 2 times the power of the load equipment. For example, if your electric furnace is about 250W, you can choose a stabilizer with a power of 500W. press.

Inductive and capacitive loads

2. Inductive and capacitive loads such as fluorescent lamps, fans, motors, pumps, air conditioners, refrigerators, etc. The power of the voltage regulator should be 3 times the power of the load device. For example, if the motor is 1000W, then the voltage regulator needs to choose 3000W. UKEO offers the best single phase voltage stabilizer.

Large inductive and capacitive loads

3. Under the environment of large inductive and capacitive load, the starting current of the load should be considered particularly large (up to 5 to 8 times of the rated current), so the power of the voltage stabilizer should be more than 3 times the load power.

Long-term plan

4. Before purchasing a machine, it is necessary to consider whether it is necessary to add equipment in the future, and whether the voltage stabilizer needs to be reserved for expansion capacity. Whether it is a single machine or a whole plant, the purchased voltage stabilizer must reserve sufficient capacity to avoid The voltage stabilizer is 100% loaded, and the load rate of the voltage stabilizer is generally 80%.

Which should I choose between single phase voltage stabilizer and three phase voltage stabilizer?

Generally, single phase voltage stabilizers are used in households, and three phase voltage stabilizers are used in factories where the supply voltage is relatively high. These automatic voltage regulators are selected according to the needs of customers. Determine your needs and contact us.