Cheap voltage stabilizer for home - Servo - Table type - 110v-260v

Product Introduction

If you need cheap voltage stabilizer for home, UKEO will be your good supplier, we offer you the right price as well as ODM&OEM.

Product parameters

Requirments / Model		500VA	1000VA	1500VA	2000VA	3000VA	5000VA	8000VA	10000VA
Input	Phase	Single phase
	Voltage	70V-260V / 110V-260V / 140V-260V Options
	Frequency	50/6OHz
	Adjusting time	<0.5s(when input voltage has a change of 10%)
Output	Voltage	220V士3%AC
	Frequency	50/60Hz
	Loading power factor	0.8
Environmental	Operating temperature	-5~+40℃
	Storage temperature	-10~+50℃
	Humidity	20% to 90%
Protection	Over Volt.	YES
	Overheating	YES
	Over load	YES
	Short Circuit	YES
	Low voltage	YES
	Delay	YES
Packaging	Net Wt.(KG)	3.64	5.84	7.21	7.7	12.82	15.38	24.16	27.8
	PCS PER CTN	4			2	1
	Gross Wt.(KG)	16.56	25.6	30.26	16.59	13.9	16.96	26.1	29.78
	Product size(mm)	252149172	286209202		306209202	370270244		442317264
	Package size(mm)	375295430	495335490		495335490	425310305		495360335

How do I choose a voltage stabilizer for my house?

We all want to choose cheap and good products, but automatic voltage regulators can not only be based on cost-effectiveness. The use of automatic voltage regulators at home is related to the safety of life and property. You need to choose the most suitable one according to the situation in your home.

How to tell if you need a voltage regulator in your home?

If the voltage in the home is high and low, some electrical appliances cannot operate normally because the voltage is unstable, such as the lighting equipment flickering; or when the air conditioner is turned on, the air conditioner’s external unit makes abnormal noises. Most of these situations are due to Caused by low voltage, if the voltage is lower than 220V after measuring with a multimeter, then it is because the voltage is too low. At this time, it is necessary to buy a voltage stabilizer at home.

How to choose the right cheap voltage stabilizer for home?

How to choose a suitable automatic voltage regulator needs to be judged according to the situation of electrical appliances in the home. If you only need to use some electrical appliances, first check the power of those electrical appliances, and then select the automatic voltage with a power slightly larger than these electrical appliances. Regulator.

Some references

household appliances	rated power	Instant start power
Wall-mounted air conditioner 1.5P	1125W	1125W*3=3375W
Vertical air conditioner 3P	2250W	2250W*3=6750W
water pump	2000W	2000W*3=6000W
refrigerator	450W	450W*3=1350W
induction cooker	2000W	2000W
water heater	1800W	1800W
computer	300W	300W
TV set	200W	200w
electric light	50W	50W

Some advices

You can refer to the table above to choose a suitable voltage stabilizer according to your household electrical appliances. When choosing, you should also calculate the required power according to the type of electrical appliances.

1.

For pure resistive loads such as incandescent lamps, resistance wires, electric furnaces and other equipment, the power of the voltage stabilizer should be 1.5 to 2 times the power of the load equipment. For example, if your electric furnace is about 250W, you can choose a stabilizer with a power of 500W. press.

2.

Inductive and capacitive loads such as fluorescent lamps, fans, motors, pumps, air conditioners, refrigerators, etc. The power of the voltage regulator should be 3 times the power of the load device. For example, if the motor is 1000W, then the voltage regulator needs to choose 3000W.

3.

Under the environment of large inductive and capacitive load, the starting current of the load should be considered particularly large (up to 5 to 8 times of the rated current), so the power of the voltage stabilizer should be more than 3 times the load power.

4.

Before purchasing a machine, it is necessary to consider whether it is necessary to add equipment in the future, and whether the voltage stabilizer needs to be reserved for expansion capacity. Whether it is a single machine or a whole plant, the purchased voltage stabilizer must reserve sufficient capacity to avoid The voltage stabilizer is 100% loaded, and the load rate of the voltage stabilizer is generally 80%.

Product Introduction

How do I choose a voltage stabilizer for my house?

How to tell if you need a voltage regulator in your home?

How to choose the right cheap voltage stabilizer for home?

Some references

Some advices

1.

2.

3.

4.

Send Your Inquiry Today

Popular Products

Contact Information

+86 13757709019